Sand & Dust Chamber

Description: Sand and dust simulation is created as per customer’s requirements and their standards. All dust chambers are designed to meet common test methods such as IS, IEC, JIS etc...
Basket Size/ Volume:  Based on Customer requirements
Interior & Exterior Dust: Satin finish Stainless Steel grade 304
Collection/Agitation: As per IS 9000 standards
Mode of Simulation: Air
Thermal Insulation: Through High density & Non-flammable rock-wool with PUF Pads
Viewing Window: Suitable size of six panes toughened glass filled with dry air and strip heaters to Prevent condensed water
Port Hole: Suitable Port Hole for outlet of operational wire/ cables etc.
Controller: Advanced Eurotherm controller enable for PC communication Through suitable software.
Power requirement: Three Phase, +N, 50 Hz AC with over and under voltage system trip and Single phase prevention facility. All electrical sub system protected with Independent MCBs.
Aesthetic: External -Certified Satin finish with CNC operation in Mechanical process Internal – Well designed and processed Single or cascading refrigeration systems properly painted and insulated Well designed and processed Electrical System marked properly identified and routed wiring.
Performance: All critical components of CE marked with suitable rating. All branded refrigeration components of European Community. All branded electrical components of international level.
Safety: Suitable vent assembly to prevent excess pressure developed during testing of product Compliance to CE safety norms for operator and product safety.
Optional Features: Large Port Holes
Additional Shelves: Export and special input voltages., Water re-circulation system- CoolingLight, Indicators, Light Indicators with audible sound tower/Chiller

Humidity Chamber

Description: Humidity chamber is a simulation of humidity environment only specified by customer and is controlled and monitored through highly efficient Eurtoherm controller...
Basket Size/ Volume: Based on Customer requirements
Interior & Exterior: Satin finish Stainless Steel grade 304
Temperature range: From - 75 deg .C to 200 deg. C
Temperature Stability: ±1oC (in time) at steady state conditions
Rate of change(Average): 0.5OC/min to 15OC/min (Empty Chamber)
Thermal Insulation: Through High density & Non-flammable rock-wool with PUF Pads
Viewing Window: Suitable size of six panes toughened glass filled with dry air and strip heaters to Prevent condensed water
Port Hole: Suitable Port Hole for outlet of operational wire/ cables etc.
Controller: Advanced Eurotherm controller enable for PC communication Through suitable software.
Power requirement: Three Phase, +N, 50 Hz AC with over and under voltage system trip and Single phase prevention facility. All electrical sub system protected with Independent MCBs.
Aesthetic: External -Certified Satin finish with CNC operation in Mechanical process Internal – Well designed and processed Single or cascading refrigeration systems properly painted and insulated Well designed and processed Electrical System marked properly identified and routed wiring.
Performance: All critical components of CE marked with suitable rating All branded refrigeration components of European Community All branded electrical components of international level
Safety: Suitable vent assembly to prevent excess pressure developed during testing of product • Compliance to CE safety norms for operator and product safety.
Optional Features: Large Port Holes, Additional Shelves, Export and special input voltages Water re-circulation system- Cooling tower/Chiller, Light Indicators, Light Indicators with audible sound

Hot And Cold Chamber

Description:Hot & Cold chamber is a simulation of two environments Hot, Cold only specified by customer and is controlled and monitored through highly efficient Eurtoherm controller...
Basket Size/ Volume: Based on Customer requirements
Interior & Exterior: Satin finish Stainless Steel grade 304
Temperature range: From - 75 deg .C to 200 deg. C
Temperature Stability: ±1oC (in time) at steady state conditions
Rate of change(Average): 0.5OC/min to 15OC/min (Empty Chamber)
Thermal Insulation: Through High density & Non-flammable rock-wool with PUF Pads
Viewing Window: Suitable size of six panes toughened glass filled with dry air and strip heaters to Prevent condensed water
Port Hole: Suitable Port Hole for outlet of operational wire/ cables etc.
Controller: Advanced Eurotherm controller enable for PC communication Through suitable software.
Power requirement: Three Phase, +N, 50 Hz AC with over and under voltage system trip and Single phase prevention facility. All electrical sub system protected with Independent MCBs.
Aesthetic: External -Certified Satin finish with CNC operation in Mechanical process Internal – Well designed and processed Single or cascading refrigeration systems properly painted and insulated Well designed and processed Electrical System marked properly identified and routed wiring.
Performance: All critical components of CE marked with suitable rating All branded refrigeration components of European Community All branded electrical components of international level
Safety: Suitable vent assembly to prevent excess pressure developed during testing of product • Compliance to CE safety norms for operator and product safety.
Optional Features: Large Port Holes, Additional Shelves, Export and special input voltages, Water re-circulation system- Cooling tower/Chiller
Light Indicators, Light Indicators with audible sound

Thermal Shock Chamber

Description:
Thermal Shock chamber can be categorized as:
Two –zone thermal shock chamber
Three-zone thermal shock chamber

Two zone thermal shock chamber is a simulation of two environments in different zones
1. Hot Zone
2. Cold Zone
Basket moves from one zone to another zone in a specified time period
Three zone thermal shock chamber is a simulation of three environments:
1. Hot Zone
2. Ambient Zone
3. Cold Chamber
Basket moves from one zone then comes in ambient atmosphere to another zone.
Basket Size/ Volume: Based on Customer requirements
Interior & Exterior: Satin finish Stainless Steel grade 304
Temperature range (Cold Zone): From ambient to - 75OC
Temperature range (Hot Zone): From ambient to +200 OC
Basket Movement Time: Min. 5 Seconds
Mode of Simulation: Air to Air
Temperature Stability:  ±1oC (in time) at steady state conditions
Rate of change (Average): 0.5OC/min to 15OC/min (Empty Chamber)
Thermal Insulation: Through High density & Non-flammable rock-wool with PUF Pads
Viewing Window: Suitable size of six panes toughened glass filled with dry air and strip heaters to Prevent condensed water
Port Hole: Suitable Port Hole for outlet of operational wire/ cables etc.
Controller: Advanced Eurotherm controller enable for PC communication Through suitable software.
Power requirement: Three Phase, +N, 50 Hz AC with over and under voltage system trip and Single phase prevention facility. All electrical sub system protected with Independent MCBs.
Aesthetic: External -Certified Satin finish with CNC operation in Mechanical process Internal – Well designed and processed Single or cascading refrigeration systems properly painted and insulated Well designed and processed Electrical System marked properly identified and routed wiring.
Performance:  All critical components of CE marked with suitable rating All branded refrigeration components of European Community All branded electrical components of international level
Safety:  Suitable vent assembly to prevent excess pressure developed during testing of product. Compliance to CE safety norms for operator and product safety.
Optional Features: Large Port Holes, Additional Shelves, Export and special input voltages, Water re-circulation system- Cooling tower/Chiller, Light Indicators , Light Indicators with audible sound

Altitude Chamber

Corrosion Chamber

Description: Basket Size/ Volume: Based on Customer requirements
Based on Customer requirements: Satin finish Stainless Steel grade 304
Mode of Simulation: Water
Thermal Insulation: Through High density & Non-flammable rock-wool with PUF Pads
Viewing Window: Suitable size of six panes toughened glass filled with dry air and strip heaters to Prevent condensed water
Port Hole: Suitable Port Hole for outlet of operational wire/ cables etc.
Controller: Advanced Eurotherm controller enable for PC communication Through suitable software.
Power requirement: Three Phase, +N, 50 Hz AC with over and under voltage system trip and Single phase prevention facility. All electrical sub system protected with Independent MCBs.
Aesthetic: External -Certified Satin finish with CNC operation in Mechanical process, Internal – Well designed and processed Single or cascading refrigeration systems properly painted and insulated Well designed and processed Electrical System marked properly identified and routed wiring.
Performance: All critical components of CE marked with suitable rating, All branded refrigeration components of European Community, All branded electrical components of international level

Rain Chamber

Description: Basket Size/ Volume: Based on Customer requirements
Interior & Exterior: Satin finish Stainless Steel grade 304
Dust Collection/Agitation: As per IS 9000 standards
Mode of Simulation: Water
Thermal Insulation: Through High density & Non-flammable rock-wool with PUF Pads
Viewing Window: Suitable size of six panes toughened glass filled with dry air and strip heaters to Prevent condensed water
Port Hole: Suitable Port Hole for outlet of operational wire/ cables etc.
Controller: Advanced Eurotherm controller enable for PC communication Through suitable software
Power requirement: Three Phase, +N, 50 Hz AC with over and under voltage system trip and Single phase prevention facility. All electrical sub system protected with Independent MCBs.
Aesthetic: External -Certified Satin finish with CNC operation in Mechanical process Internal – Well designed and processed Single or cascading refrigeration systems properly painted and insulated Well designed and processed Electrical System marked properly identified and routed wiring.
Performance: All critical components of CE marked with suitable rating All branded refrigeration components of European Community All branded electrical components of international level
Safety: Suitable vent assembly to prevent excess pressure developed during testing of product Compliance to CE safety norms for operator and product safety.
Optional Features: Large Port Holes, Additional Shelves, Export and special input voltages, Water re-circulation system- Cooling tower/Chiller, Light Indicators, Light Indicators with audible sound